AFG 5.0 AT Guide de l'utilisateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 21
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
BEFORE
YOU BEGIN
8
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN
ASSEMBLY
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A Open HARDWARE BAG 1.
B Slide LEFT CONSOLE MAST BOOT
over MAIN FRAME BRACKET.
C Insert 3 SCREW (A) on the bottom
outside of the mast boot
and secure.
D Repeat on other side.
Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to
lift the treadmill at this time. Remove plastic wrap from console masts.
*NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in
before completely tightening any ONE bolt. A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
PRE-ASSEMBLY
MAIN FRAME BRACKET
SCREW (A)
CONSOLE MAST BOOT
SCREW (B)
END CAPSIDERAILS
ASSEMBLY S TE P 1
SCREW (A)
25 mm
Qty: 6
HARDWARE BAG 1 CONTENTS :
ASSEMBLY S TE P 2
BOLT (B)
15 mm
Qty: 6
SPRING WASHER (C)
8.2 mm
Qty: 6
ARC WASHER (D)
8.2 mm
Qty: 6
HARDWARE BAG 2 CONTENTS :
A Pull LEAD WIRE through RIGHT
CONSOLE MAST. After pulling the
LEAD WIRE through the mast, the
top of the CONSOLE WIRE should
be located at the top of the mast.
Detach and discard LEAD WIRE.
B Open HARDWARE BAG 2.
C Slide RIGHT CONSOLE MAST over
MAIN FRAME BRACKET.
*Note: Do not pinch CONSOLE
CABLES when placing the mast onto
the main frame.
D Insert 3 BOLTS (B) on the bottom
outside of the mast and secure with
3 SPRING WASHERS (C) and
3 ARC WASHERS (D).
E Repeat on other side.
5.0AT_Rev.1.6.indd 8-9 3/3/08 10:53:23 AM
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 20 21

Commentaires sur ces manuels

Pas de commentaire